Jamma Harness with 2x28pins 56 Pin connector that can be used for standard Jamma Arcade cabinet (Machines) and PCBs. 5 Foot Length.
All wiring uses 22AWG ,Cheaper harnesses will only use 24AWG or 26AWG. The problem is if the resistance of wire is too high, it can cause a significant power loss before the DC voltages even reach the JAMMA PCB.
Fast connection to power supply with attached terminal forks for all voltages (+5VDC, +12VDC, -5VDC, GND)
Video signals connect through included standard monitor connector.
Full Grounding Loop for all those joystick/button micro-switches on your control panel.
Menu
