This coin acceptor a 12 Volt power supply to operate, which can be taken from a JAMMA harness or a spare molex connector on a pc power supply – yellow wire for 12V
Set the slot height plate to the correct coin size. Note that for larger coins, this plate is best removed to avoid bearing against the coin door.
Clip the correct sample coin into the spring-loaded clip, in place of the dummy plastic coin.
Leave the switches unchanged for most applications
Diameter: 18mm ~ 31mm
Thickness: 1.2mm ~ 3.0mm
The coin acceptor is supplied with the following:
Chrome Mounting Screws
Zener Diode – Must be connected for use with 5 Volt devices